 |
 |
||||||
 |
 |
 |
 |
 |
 |
 |
|
| |
|
||||||
|
|
|
|
|
|
|
|
|
 |
||||||
Reconditioned Equipment |
||||||
|
Rosenquist Electro-Flow
• Continuous Radio Frequency Edge Gluer. • Feed rates up to 20 feet per minute • 100" long by 2" thick capacity • 30 kW generator. • 40 HP pump unit. • Glue spreader and in-feed table • Flying cut off saw available |
|||||
|
Rosenquist Electro-Flow
• Continuous Radio Frequency Edge Gluer. • Feed rates up to 20 feet per minute • 100" long by 2" thick capacity • 30 kW generator. • 40 HP pump unit. • Glue spreader and in-feed table • Powered In-feed table • Item #RB-97 • Current Condition: As Removed From Service |
|||||
PHOTO NOT AVAILABLE |
L&L GA-84
• Platen Area: 48" x 84" x 4 1/2" Thick • 15 kW RF Generator • Side Pressure: 15 each 2" bore x 4" stroke hydraulic cylinders • Top Pressure: 4 each 5" bore pneumatic cylinders • In-feed and Out-feed Tables • Pump: 5 HP 10 GPM • Powered In-feed table • Item #RB-97 • Current Condition: As Removed From Service |
|||||
PHOTO NOT AVAILABLE |
L&L GA-84
• Platen Area: 50" x 84" x 4 1/2" Thick • 30 kW RF Generator • Side Pressure Applied By 15 each 2" Bore x 4" Stroke Hydraulic Cylinders • Top Pressure Applied By 2 each 2" Bore Hydraulic Cylinders • 5 HP 10 GPM Hydraulic Pump • Item #RB-86 • Current Condition: As Removed From Service |
|||||
|
4 Section Cold Press
• Each Section 30" Wide x 50" Deep • Total Press Area 120" x 50" • 48" Daylight Opening • Pressure Applied By 2 Each 8" Bore x 12" Stroke Hydraulic Cylinders Per Section. • 7 1/2 HP 10 GPM Pump Unit • Skate Bed For Ease Of Loading • Item #RB-100 • Current Condition: Rebuilt |
|||||
|
Slat Bed Radio Frequency Edge Gluer
• Ideal For Truck Flooring • Platen Area 60" x 240 x 4 1/2" Thick • Top Pressure Applied by 10 each 12" Pneumatic Air Pods • Edge Presure Applied By 42 each 2 1/2" Bore by 8" Stroke Hydraulic Cylinders. • 100 kW RF Generator • Converoized Glue Spreader • Item #RB-25 • Current Condition: As Removed From Service |
|||||
|
One Shuttle Table 55" x 104" Capacity
• Ideal for lumber banding and assembly work. • 4-sided clamping provided by 18 each 4" Bore Pneumatic Cylinders • Several Generator Sizes Available • Item #RB-113 • Current Condition: As Removed From Service |
|||||
|
ROSENQUIST Electro-Glue (Pictured When New)
• Model EG-50-60-A • ideal for lumber banding and assembly work. • Press Mounted on a 30 Degree Angle • Platen Area 50" Deep x 60" Wide x 2" Thick • 4-way Clamping • Side Pressure Applied by 11 each 5" Bore by 6" Stroke Pneumatic Cylinders • End Pressure Applied by 8 each 5" Bore by 6" Stroke Pneumatic Cylinders. • Several Generator Sizes Available • Item #RB-76 • Current Condition: As Removed From Service |
|||||
|
L&L Do-All
Condition: As Removed from Service
• Platen Area 50" deep by 100" Wide • Inclined Radio Frequency Edge Gluer and Assembly Press • Press Mounted on a 30 Degree Angle • 4-Way Clamping • Side Pressure Applied by 9 each 4" bore by 3" Stroke Pneumatic Cylinders • End Pressure Applied by 8 each 4" bore by 3" Stroke Pneumatic Cylinders • Top Pressure Applied by 2 each 5" Bore Pneumatic Cylinders • 20 kW RF Generator • Item #RB-109 • Current Condition: As Removed From Service |
|||||
PHOTO NOT AVAILABLE |
L&L Curved Plywood Press
• Platen Area 36" X 63" • Down Acting Press • Loading from the 36" ends • Pressure Applied by 3 each 8" Bore by 30" Stroke Hydraulic Cylinders • 10 HP Hydraulic Power Unit • 50 kW RF Generator • Powered Gates • Item #RB-102 & 103 • Current Condition: As Removed From Service |
|||||
Home _ Service _ Case Studies _ Learn More _ Equipment News _ Products _ Contact |
©
2004 Rosenquist, Inc. |
